Hangar 9 Fun Scale PT-19 PNP

Hangar 9 brings one of the primary trainers used in World War II designed for RC sport and scale pilots looking to transition from foam models to balsa. The new Hangar 9® Fun Scale PT-19 PNP is a balsa model of a military trainer, with outstanding sport-plane flying characteristics at a great value.

During World War II, Fairchild PT-19s turned thousands of raw recruits into combat-ready fighter pilots. PT-19s were a critical part of the primary flight-training program, hence one of the most widely manufactured aircraft. Although not a trainer, RC pilots with a bit of time behind the sticks will love how the new Hangar 9® Fun Scale PT-19 PNP handles in the air.

Foam RC pilots will be familiar with the PT-19 brushless outrunner power system, enjoy a wide variety of battery options, and easy field assembly. The all-wood airframe is finished in genuine UltraCote® film that’s long-lasting and easy to maintain. Modern and innovative Spektrum electronics will bring the PT-19 to life and allow you to fly it how you want, from sport aerobatics to touch-n-go practice. The new Hangar 9® Fun Scale PT-19 PNP features outstanding sport-plane flying characteristics at a great value.

Features
Expertly constructed with lightweight, laser-cut balsa and plywood
Plug-N-Play® Completion Level
Fits a wide variety of battery options to provide a wide range of performance and flight times.
No glue is required for the main assembly, and it can be ready to fly in less time than it takes to charge a battery
Painted fiberglass cowl
60-amp Spektrum™ Avian™ Smart ESC provides real-time battery voltage, current, motor RPM, and other data via compatible receivers and transmitters
Factory-installed 4250-600Kv Brushless Outrunner Motor
Optional-use landing gear fairings and pilot increase the realistic appeal
Four factory installed Spektrum™ A391 servos
Large top hatch makes access to electronics and batteries convenient.
Two-piece, bolt-on wings for more accessible transportation and field assembly
Covered in genuine Hangar 9® UltraCote® film
Efficient 14 x 8.5 wood propeller included for 3-4S Lipo battery powered. (5S and 6S LiPo batteries require a propeller change).
FLYING A BALSA AIRCRAFT HAS NEVER BEEN EASIER
Hangar 9 brings one of the primary trainers used in World War II designed for RC sport and scale pilots looking to transition from foam models to balsa. Although not a trainer, RC pilots with a bit of time behind the sticks will love how the new Hangar 9® Fun Scale PT-19 PNP handles in the air. Foam RC pilots will be familiar with the PT-19 brushless outrunner power system, enjoy a wide variety of battery options, and easy field assembly. It features lightweight balsa and plywood construction and is finished in genuine UltraCote® that’s long-lasting and easy to maintain. The two-piece, bolt-on wings allow for convenient transportation and setup. Pilots can be ready to fly in less time than it takes to charge a battery. At the workbench, the PT-19 assembly is easy, with only standard tools needed. All you need to do is bolt the model together, install the receiver, charge a battery and fly. The new Hangar 9® Fun Scale PT-19 PNP is a balsa model with outstanding sport-plane flying characteristics at a great value.

Specifications

Approximate Assembly Time
Less than 1 Hour
Battery
Sold Separately
Charger
Sold Separately
Completion Level
Plug-N-Play
Connector Type
IC5
Flaps
No
Landing Gear
Fixed
Material
Wood
Minimum Required Radio
6 Channel
Motor Size
4250-600Kv
Motor Type
Brushless – Outrunner
Power Type
Electric
Product Length
46.18″ (1173 mm)
Product Weight
95.4oz (2704g)
Prop Range
14×8.5E (4S), 12x6E (6S)
Propeller Size
14×8.5E
Radio
Sold Separately
Receiver
Sold Separately
Servos
Included
Skill Level
Level 3
Speed Control
Included
Technology
Smart
Trim Scheme Colors
HANU884 Cub Yellow, HANU885 Midnight Blue, HANU866 True Red, HANU870 White
Wingspan
56.5″ (1435 mm)