FMS FMS T-28D V4, PNP, 1400mm W/Reflex

Overview
No matter whether you had an FMS T28 before, the new V4 is full of surprises. First of all, the foam ratio has been upgraded from EPO 40 to the lighter and larger EPO 52, which alleviates the airplanes weight, without weakening the airplane. Moreover, the original oil paint which has an unavoidable negative side effect of corrosion has been replaced by the latest environmental water-based paint.

The latest FMS multi-connector is used in the V4, which makes the assembly easy and simple while leaving the wires orderly and user- friendly. The 1400mm T28 V4 adopts the new design of ball linkage to remove the play for a more accurate flight. The updated 4258 kv650 motor increases the power and speed around 30% higher than the previous V3 version, plus the new power system can work with 4S, 5S, and 6S batteries to satisfy different customer requirements. Both front and rear landing gears are now metal, with a shock absorption function for hard landings.

In terms of construction and performance the 1400mm T28 V4 is totally different to the old versions. It is certain that the V4 greatly enhances flight appeal.

Don’t miss out on this thrilling experience!

Features
Shock absorbing metal oleo struts covered with scale plastic parts for looks
Glueless wing “Servo Pockets” (servos in the wing are screwed in as opposed to glued for easier replacement)
Upgraded (larger) 4258-650KV motor with Japanese ball bearings and magnets
Pre-installed ball links on push rods as opposed to the old clevis-control horn setup
FMS multi-connector system for cleaner wiring and easy wing removal
FMS removed the functional cowl flaps. While technically a downgrade, there are two less servos to worry about
Detailed cockpit with pilot figure
Bright LED navigation lights
Scale details like chrome spinner and landing gear doors
Made of durable EPO foam

Specifications

Approximate Assembly Time
1-3 Hours
Approximate Flight Time
6 minutes
Battery
Sold Separately
CG (Center of Gravity)
3.1-3.3 in (80-85mm) from leading edge
Completion Level
Plug-N-Play
Connector Type
XT-60
Flaps
Yes
Material
EPO
Minimum Required Radio
6 Channel
Motor Size
4258 KV650 motor
Power Type
Electric
Product Length
46.7″ (1186 mm)
Propeller Size
13 x 9
Receiver
Sold Separately
Speed Control
Included
Wing Area
33.4 sq dm
Wing Loading
73.3g/sq dm
Wingspan
55.1″ (1400 mm)